A reliable forge can make the difference between frustrating heat-up times and clean, consistent forging. If you’re shopping for a double burner blacksmith forge, the right choice depends on how much heat you need, what you plan to make, and how portable your setup must be.
This roundup focuses on practical options for knife makers, farriers, and general blacksmithing, with a close look at burner performance, build quality, and everyday usability.
Best 10 Double Burner Blacksmith Forge Picks for 2026
Editor’s Pick
2-Burner Stainless Steel Forge with Double Doors
- Dual burners help heat long stock more evenly.
- Double doors can speed warm-up and reduce propane use.
- 2600°F-rated ceramic fiber insulation supports hot work.
Best For: blacksmiths who want quicker, more even heating on long pieces
Accessory Pick
24-Inch Heat-Resistant Forge Stand
- Heat-resistant steel stand for forge setups.
- Non-slip feet help keep the station stable.
- Lightweight design makes it easier to move.
Best For: users who need a portable, stable stand for a forge kit
Complete Kit Pick
Pre-Assembled 2-Burner 2600°F Forge
- Arrives with key parts pre-installed for quick setup.
- Two burners and insulation help manage heat efficiently.
- Rated to 2600°F with selectable burner use.
Best For: beginners or smiths wanting a ready-to-use forge kit
Value Choice
Stainless 2-Burner Forge for Knife Making
- Stainless steel build with 1-inch insulation.
- Fits most standard propane tanks.
- Reaches up to 2600°F for metalworking.
Best For: knife makers wanting a compact, easy-to-connect forge
High-Heat Square Double Burner Pick
Portable Propane Gas Forge Double Burner 2700°F/1482℃
- 47KWh double burners for fast, even heating
- 1" ceramic fiber insulation helps reduce fuel use
- Includes gloves, tongs, and fire bricks
Best For: Hobbyists and knife makers wanting a high-output starter forge
Beginner-Friendly Double Door Pick
Nelyrho 2-Burner Propane Forge Kit
- Ready-to-forge kit with hose, regulator, and firebrick
- Two burners reach up to 2600°F
- Double doors help retain heat and fit longer stock
Best For: Beginners wanting a simple propane forge kit
Largest Capacity Multi-Burner Pick
VEVOR Portable Propane Forge, 3 Burners
- Three burners and 30mm refractory cotton for fast heat
- Hexagonal chamber offers more interior space
- Adjustable valves help tune heat for different metals
Best For: Users who need more room and burner power for varied projects
Safety-Focused Portable Double Burner Forge
Portable double burner with safer gas routing
- Hard-pipe gas transition helps keep the hose away from heat
- 0-30 PSI regulator and mini ball valve support stable control
- Heats fast with 2600°F ceramic fiber insulation
Best For: Beginners and home workshops
Heavy-Duty Stainless Double Burner Forge
Stainless double burner forge with separate control
- SS-304 stainless steel body for durability
- Two burners with individual ball valves
- 2600°F rating with a large insulated heating zone
Best For: Regular blacksmithing and knife making
Deluxe Two-Door Forge Kit with Extras
High-temp double burner forge kit with tools
- Reaches 2700°F with ceramic fiber insulation
- Includes tongs, gloves, brush, hose, and regulator
- Rigid firebrick base helps create a flat work surface
Best For: Users who want a complete forge kit with accessories
Editor’s Pick – 2-Burner Stainless Steel Forge with Double Doors
This double burner blacksmith forge is built for faster, more even heat when you’re working long stock, knives, or general metalforming. The dual-burner layout is designed to reduce the uneven heating problem that can happen when burners sit too far apart, while the double doors help trap heat and save propane during warm-up.
Best For: Smiths who want a compact 2-burner forge for quicker heating and better control on longer workpieces.
Pros:
- Double-burner design helps stack heat more evenly on long bars.
- Double doors can help the forge heat steel faster and conserve propane.
- 1400-grade ceramic fiber insulation is rated up to 2600°F.
- Stainless steel body with plasma surface treatment suits high-heat use.
Cons:
- Recommended refractory cement and ceramic fiber add-on work for best safety and durability.
- One door should stay open during extended high-temperature use to manage airflow.
- Hose or burner should be disconnected after use to avoid residual heat damage.
Overall, this forge is a practical pick if you want a durable, heat-efficient setup with features aimed at better temperature control. The design focuses on speed, insulation, and even heating rather than extra complexity.
Accessory Pick – 24-Inch Heat-Resistant Forge Stand
If you already have a double burner blacksmith forge or single-burner setup, a dedicated stand can make your workflow safer and easier. This 24-inch forge stand is built to support forge starter kits, stay heat-resistant under blacksmithing conditions, and keep your setup portable from one work area to another.
Best For: Makers who need a sturdy, movable stand for a propane forge or forge starter kit.
Pros:
- Heat-resistant design helps protect the stand from forge heat.
- High-quality steel construction is made for durability.
- Non-slip feet help reduce movement during use.
- Lightweight format makes it easier to move and set up in different locations.
Cons:
- Stand only; forge and anvil are not included.
- Works as a support accessory rather than a complete forging solution.
- Best value depends on whether you already own compatible forge equipment.
This is a straightforward support piece for blacksmiths who want a more stable working height and easier transport. It won’t replace the forge itself, but it can improve day-to-day setup and comfort.
Complete Kit Pick – Pre-Assembled 2-Burner 2600°F Forge
This portable double burner blacksmith forge is aimed at buyers who want a ready-to-go kit with strong insulation and minimal setup. The forge arrives with key accessories pre-installed, and the dual burners let you choose how much heating power to use, which can help reduce propane consumption during lighter work.
Best For: Beginners and working smiths who want a pre-assembled 2-burner forge with solid insulation.
Pros:
- Pre-installed accessories make setup quick after unpacking.
- Reaches up to 2600°F, with forging possible after about 3 minutes of preheating.
- Two-layer insulation uses thermal cotton and fire brick to reduce heat loss.
- Selectable burner use can help save propane and cost.
Cons:
- Heavier than the lightest compact forges at 10.4 kg.
- Best performance depends on connecting the proper propane tank and hose setup.
- Maximum temperature is listed in both Fahrenheit and Celsius, so buyers may want to verify specs for their workflow.
For users who want a complete, integrated forge without piecing together every part separately, this model is a strong contender. Its main appeal is convenience paired with high-temperature capability and substantial insulation.
Value Choice – Stainless 2-Burner Forge for Knife Making
If you want a compact double burner blacksmith forge with simple compatibility and solid heat retention, this stainless steel kit is worth a close look. It’s designed for common propane tanks, supports a 0-30 PSI burner nozzle pressure range, and uses 1-inch insulation to help hold temperature while you work.
Best For: Knife makers and metalworkers who want a portable 2-burner forge with straightforward propane compatibility.
Pros:
- Stainless steel construction is built for durability.
- 1-inch thick insulation helps reduce heat loss.
- Fits most standard propane tanks for easier setup.
- Rated to reach up to 2600°F for efficient metalworking.
Cons:
- Safety guidance recommends disconnecting hoses or burners after heating.
- Refractory materials or rigidizer are recommended for best long-term performance.
- Basic 2-burner style may be less feature-rich than some complete kits.
This forge keeps the focus on portability, insulation, and common-sense compatibility rather than extra extras. It’s a practical choice if you want a no-fuss setup for blacksmithing, knife making, or general metalwork.
High-Heat Square Double Burner Pick – Portable Propane Gas Forge Double Burner 2700°F/1482℃
If you want a double burner blacksmith forge that prioritizes fast heat-up and even flame exposure, this square propane model is built for practical shop use. Its 47KWh double burners, vertical firing system, and insulated chamber are aimed at forging, heat-treating, bending, and reshaping metal with less fuel waste.
Best For: Hobbyists, knife makers, farriers, and metalsmiths who want a large-capacity, heat-efficient forge with useful starter accessories.
Pros:
- 47KWh (160,000 BTU) double burners and vertical firing system help heat metal more evenly and quickly.
- 1″ high-density ceramic fiber blanket and dual side doors support better insulation and efficiency.
- Includes heat-resistant gloves, 3 fire bricks, and a 15.74 in tong for a more complete starter kit.
- Wide material compatibility covers common forging and heat-treating metals like steel, brass, copper, and aluminum.
Cons:
- Uses a propane setup, so it is best for outdoor or properly ventilated use.
- Large-capacity capability may be more forge than a casual occasional user needs.
- Setup and tuning still depend on getting the air choke and gas valve adjusted correctly.
This is a strong option if your priority is performance per fuel use in a square, double-burner layout. The included tools and universal propane connection make it especially appealing for builders who want to start forging without piecing together the basics.
Beginner-Friendly Double Door Pick – Nelyrho 2-Burner Propane Forge Kit
This double burner blacksmith forge is a practical choice if you want a straightforward kit with minimal setup. The two burners, double doors, and included regulator make it easy to get started on knife making, blade heating, tool shaping, and basic home blacksmithing projects.
Best For: Beginners and DIY blacksmiths who want an easy-to-set-up propane forge with heat-retaining double doors.
Pros:
- Ready-to-forge kit includes the forge, burners, hose, regulator, and firebrick.
- Two burners can reach up to 2600°F and include a 0–30 PSI regulator for adjustable heat.
- Double doors help retain heat and can be opened for longer stock or better airflow.
- Stainless steel shell and insulated chamber are built for repeated high-temperature use.
Cons:
- The notes recommend applying refractory materials or rigidizer for best long-term insulation performance.
- It is still a propane forge, so safe outdoor or well-ventilated operation is required.
- As a beginner kit, it may not offer the capacity of larger multi-burner forges.
If you want a simple entry point into forging, this model focuses on convenience and heat control rather than advanced capacity. The double-door design and included components make it an approachable pick for small-shop and beginner work.
Largest Capacity Multi-Burner Pick – VEVOR Portable Propane Forge, 3 Burners
For buyers comparing a double burner blacksmith forge against a larger format, this 3-burner VEVOR model stands out for capacity and heat concentration. Its hexagonal chamber, refractory cotton insulation, and adjustable burner controls are built to handle a wide range of forging and metal-art tasks.
Best For: Makers who want a larger interior and more burner power for versatile forging projects.
Pros:
- Three burners and 30mm refractory cotton help it quickly reach and maintain up to 2600°F.
- Hexagonal chamber offers a taller, more spacious interior for varied workpieces.
- Adjustable valves and airflow control support better temperature management across different metals.
- CSA-certified threaded propane hose and powder-coated cold-rolled steel body emphasize safety and durability.
Cons:
- It is larger and heavier than compact two-burner options.
- The extra capacity may be unnecessary if you mainly work on small beginner projects.
- As with any propane forge, it should be used in a compact workshop only if ventilation and space are appropriate.
This is the best fit when interior room matters as much as heat output. If your projects vary in size and you want a forge that leans more toward versatility than portability, the added burner and chamber space make a meaningful difference.
Safety-Focused Portable Double Burner Forge – Portable double burner with safer gas routing
If you want a double burner blacksmith forge that’s built for safer everyday use, this portable propane kit stands out for its hard-pipe gas transition, mini ball valve, and 01? Actually 0-30 PSI regulator setup. The ceramic fiber insulation helps it heat quickly and hold temperature, while the double-door layout gives you more control over heat retention and airflow during forging.
Best For: Beginners and home workshop users who want a safer, easy-to-use double burner forge for knife making and general metalworking.
Pros:
- Metal hard pipe keeps the gas hose farther from extreme heat to reduce aging and leak risk
- Independent mini ball valve and 0-30 PSI regulator support stable flame control
- Ceramic fiber insulation is rated up to 2600 B0F and heats up in about 3 minutes
- Double doors let you close in heat for faster forging or open one side to manage airflow
Cons:
- Best performance still depends on applying refractory or hardener to fire-resistant insulation materials
- Portable size is geared toward beginner and workshop use rather than larger-scale forging
Overall, this forge is a practical pick if safety and straightforward operation matter as much as heat performance. Its feature mix is especially appealing for first-time users who want a dependable setup without complicated installation.
Heavy-Duty Stainless Double Burner Forge – Stainless double burner forge with separate control
This double burner blacksmith forge is aimed at users who want a durable stainless-steel body and a roomy heating zone for knife making and forging work. With two individually controlled burners, a 2600 B0F rating, and 1-inch high-density ceramic fiber blanket lining, it’s built to deliver strong heat while helping reduce fuel consumption.
Best For: Blacksmiths and knife makers who want a sturdy stainless double burner forge with separate burner control.
Pros:
- Two burners are individually controlled with ball valves
- Large heating zone is lined with 1-inch high-density ceramic fiber blanket
- SS-304 stainless steel construction adds durability
- Includes burner, regulator, firebrick, hose, blanket, Teflon tape, and refractory coating
Cons:
- At 34 pounds, it is less portable than lighter compact options
- Country compatibility for the regulator connection is limited to specific regions listed by the seller
For buyers prioritizing build quality and burner-by-burner control, this forge offers a straightforward, workhorse-style setup. The heavier construction and full accessory bundle make it a strong candidate for regular blacksmithing sessions.
Deluxe Two-Door Forge Kit with Extras – High-temp double burner forge kit with tools
This double burner blacksmith forge is a feature-rich kit for users who want more than just the furnace itself. It reaches up to 2700 B0F, uses a fully insulated two-door design, and includes practical extras like tongs, gloves, a brush, and metal hoops for a more complete forging setup.
Best For: Beginners or experienced makers who want a high-temperature forge kit with useful included accessories.
Pros:
- Rated up to 2700 B0F with refractory ceramic fiber insulation
- Includes tongs, gloves, brush, door handles, hose, regulator, and firebrick materials
- Dual burner design and propane fuel support fast heating and efficient operation
- Rigid refractory fire brick base creates a flatter working surface
Cons:
- Pressure range is specified for 1 to 25 PSI, so setup should match the burner’s operating limits
- Best suited to forge work and recycling projects rather than larger industrial tasks
This kit is appealing if you want a more complete out-of-the-box setup with both the forge and basic tools included. Its combination of high temperature, insulation, and accessories makes it a practical option for users building a home forging station.
How We Picked These Double Burner Blacksmith Forge Options
We focused on forge models that match real workshop needs: strong heat output, practical chamber size, dependable burner setup, and materials suited to repeated high-temperature use. We also gave preference to units that are easier to move, set up, and maintain, since portability and convenience matter just as much as peak temperature for many buyers.
Because this is a Double Burner Blacksmith Forge roundup, we emphasized balanced heat distribution and enough working space for common tasks like knife heat-treating, forging small tools, and general farrier work.
Quick Comparison: What Matters Most
If you want fast, even heating for blades and small tools, prioritize burner quality and chamber design over marketing temperature claims alone. A larger forge can be useful for longer stock or multiple pieces, while a compact unit is often better for efficiency and faster warm-up.
Also compare included accessories. Regulators, firebrick, double doors, stands, and valve controls can significantly change the value of a forge package. For many buyers, a complete kit is cheaper and simpler than sourcing parts separately.
Key Buying Factors for a Double Burner Blacksmith Forge
Heat Output and Temperature Range
Look for a forge that can reach and maintain working heat without excessive fuel use. Published maximum temperatures are useful, but real-world performance depends on insulation, burner placement, and airflow control.
Chamber Size and Door Layout
A wider chamber helps with longer stock and better maneuverability. Double doors can improve access and reduce heat loss when loading or adjusting workpieces, which is especially helpful in a busy shop.
Portability and Build Materials
Portable designs are ideal for mobile work, classes, and smaller shops. Steel construction is common, but thickness, insulation, and overall stability matter more than weight alone. If you plan to move the forge often, check how the unit is balanced and whether a stand is included.
Fuel Control and Safety Features
Good control starts with a reliable regulator and easy-to-use valve setup. Clear fuel adjustment helps you move from warm-up to working heat without waste. Make sure the forge is compatible with your propane system and always follow proper ventilation and safety practices.
Who Should Buy Which Double Burner Blacksmith Forge?
Knife makers should favor efficient heat control, double doors, and stable temperature retention. Farriers often need a larger working area and fast recovery between heats. Beginners may benefit most from a kit with included accessories and simple setup, while experienced users may prefer a more customizable forge with better control components.
If you’re choosing a Double Burner Blacksmith Forge for general use, aim for the best balance of chamber size, burner performance, and included hardware rather than the highest temperature rating alone. That approach usually delivers the best everyday results.